ODOT finally activated the links to the handout and presentation documents from the I-35/122nd St/I-44 meeting last week.
https://oklahoma.gov/content/dam/ok/...%20Handout.pdf
https://oklahoma.gov/content/dam/ok/...esentation.pdf
At the bottom of this page they have a PDF link which shows in detail what the plans are: https://oklahoma.gov/odot/programs-a.../20230801.html
Approved and it also includes a short widening of I-35 from the Canadian River bridge to the Goldsby interchange:
- https://oklahoma.gov/odot/citizen/ne...g-wrap-up.htmlApproved at the commission meeting was an up to $105 million project to reconstruct the I-35 and SH-9W interchange south of Norman to accommodate heavy traffic in the area. The project will convert the interchange into a Divergent Diamond Interchange configuration, similar to the one now in use in Elk City at I-40 and Main St. The project will also expand I-35 to six lanes from the Canadian River south to the Goldsby interchange. The reconstruction will begin this fall and is expected to complete in summer of 2026.
ODOT also updated the new 5 year county bridge and road improvement program for anyone who wants to browse and kill some time:
Full plan here: https://oklahoma.gov/content/dam/ok/...Commission.pdfThe commission voted to approve the annual update to the CIRB Plan for Federal Fiscal Years 2024 through 2028. The plan includes $804 million for reconstruction or rehabilitation of 176 county bridges and improvements to nearly 400 miles of county roads during the next five years. The CIRB program uses designated state funding administered by the Oklahoma Department of Transportation combined with federal, local and tribal funds for the highest priority county transportation projects. The plan is updated annually in partnership between county commissioners, their Circuit Engineering Districts and ODOT. To view projects in the CIRB, visit www.odot.org and click CIRB under Projects and Programs.
Some major renumbering and new interstate numbers coming to the OKC metro:
Agenda item 131: https://oklahoma.gov/content/dam/ok/...a-202309-r.pdfOn tomorrow's ODOT Commission meeting agenda:
Highway Number Redesignation – Mr. Planteen
Districts IV and VIII – Delaware, Mayes, Rogers, Tulsa, Osage, Pawnee, Payne and Noble Counties
a) Remove SH-152 Designation from I-44 junction west to Kilpatrick Turnpike junction
b) Add I-240 Designation from I-44 junction west to Kilpatrick Turnpike junction
c) Add I-240 Follow Route Designation I-240/I-44 junction north to I-44/SH-152
d) Add I-344 Designation to the entirety of the Kilpatrick Turnpike
e) Add I-335 Designation to Kickapoo Turnpike
RT66man from AAROADS I copied your comment because my stupid iPhone would copy the text from the original document.
Ok, this doesn't make a lot of sense, but it's ODOT, so whatever.
First, this is a loop, and not a spur, an odd first digit is against the rules here. The Kilpatrick should be numbered I-644 or I-844 (I would prefer I-644 for the Creek Turnpike in Tulsa but whatever)
Second, wouldn't it be much simpler and logical to have OK-152 signed as the new I-844 number and end I-844 at I-44. No changes at all to I-240.
^^^ I agree completely about your second paragraph. It’d be nice to think a new major freeway was planned through Mustang along SH-152 eventually connecting north to I-40 in the future signed as I-240 but the ROW clearance would be massive through Mustang. Still I’d support it. The more freeways the better. I don’t know why else they’d end I-240 at the SH-152/Kilpatrick(I-344) interchange though.
I thought the same thing when I looked at the map. The whole "Follow i-240" thing is dumb along with the little I-240 segment W of I-44. Just rename I-644 or I-844 and put a fork in it. While they're at it, why not get even cuter and just rename I-240 to I-140 since it's in essence a spur route anyway.
But like you said, it's ODOT.
I just saw that a special committee of AASHTO has to approve this as well. I suspect they will reject this proposal, give ODOT a copy of their guidelines, and ask them to stop screwing around and finally get this right.
Even changing the entire east/west route from i-40 to i40 seems like it would make more sense than this, since it then has a signed route to bypass downtown. With whatever the new one going north from i-40 around to i-44. Instead of temporarily going both ways, but basically randomly changing in the middle of a segment, potentially worse extending that on the eventual new segment around the airport, which would increase the number of multiple interchanges with the same I-### and city street exit pairings over what this proposal will have.
The disclaimer in the PDF says this proposal will still need approval from a special committee of AASHTO and the Federal Highway Administration.
This revision will become effective upon approval by the State Transportation Commission, approval
from the AASHTO Special Committee on U.S. Route Numbering, and approval from the Federal
Highway Administration
I travel a lot and have driven in about every major city in the country and cannot recall ever seeing any "Follow" Interstate Route except when there was a Detour or closure. Have any of you?
I am fairly sure the goal here is to have as many different interstate numbering designations within the metro as physically possible.
There are currently 53 users browsing this thread. (0 members and 53 guests)
Bookmarks